Part Number Hot Search : 
MAX6064 LPV7215 S5565 C100LVEL C8225 000950 40310 LX9506
Product Description
Full Text Search
 

To Download D10AA30Z4 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Model D10AAXXZ4
Surface Mount Attenuator 7 Watts
Description
The D10AAXXZ4 is high performance Alumina (Al2O3) surface mount attenuator intended as a lower cost alternative to Aluminum Nitride (AlN) and Beryllium Oxide (BeO). The attenuator is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for inter-stage matching, directional couplers, and for use in isolators.
General Specifications Features:
* RoHS compliant * Lowest Cost * True Surface Mount * Alumina Ceramic * Non-Nichrome Resistive Element * Low VSWR
* 100% Tested Resistive Element Substrate Terminal Finish Operating Temperature Thick film Alumina Ceramic Matte Tin over Sulfamate Nickel -55 to +125C (see chart)
Tolerance is 0.010", unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Attenuation Value: Power: Frequency Range: V.S.W.R.: 1 - 6, 9, 10, 20 & 30dB 7 Watts DC - 3.0 GHz <1.25:1
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
.045 REF. .045 REF.
SIDE VIEW
.100 REF. .035 .005 .100 REF. .025 .100 .035 .005
SIDE VIEW
.100 .030 .025 .045
A C
A C
182
.140 .080
.175
D B
BOTTOM VIEW
.200 REF.
.090 REF.
.200
.090
.182
.035 .182 .140 .080 .009 .010
.175
D
.045
.200 REF.
.090 REF.
.200 .190
.090
.009
B
BOTTOM VIEW SIDE VIEW TOP VIEW FOR PART NUMBERS D10AA20Z4 AND D10AA30Z4
.045
SIDE VIEW
TOP VIEW
FOR PART NUMBERS D10AA9Z4 AND D10AA10Z4
Dimensions given in inches.
Rev. 6/24/05
Available on Tape and Reel For Pick and Place Manufacturing.
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Model D10AAXXZ4
Specifications:
PART NUMBER
D10AA1Z4 D10AA2Z4 D10AA3Z4 D10AA4Z4 D10AA5Z4 D10AA6Z4 D10AA9Z4 D10AA10Z4 D10AA20Z4 D10AA30Z4
ATTENUATION(dB)
1 2 3 4 5 6 9 10 20 30
TOL. (dB)
0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.50 1.50
POWER (WATTS)
7 7 7 7 7 7 7 7 7 7
VSWR
1.25:1 1.25:1 1.25:1 1.25:1 1.25:1 1.25:1 1.25:1 1.25:1 1.25:1 1.25:1
FREQ (GHZ)
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
Power De-rating:
Tape & Reel:
.070 .010
.060 DIA.
.160 .470 .070
.215
.120 .160
DESPOOLING DIRECTION
Dimension given in inches.
Mounting Footprint and Procedure:
Dimension given in inches. For best thermal performance the PCB should be placed with thermal joint compound to the heat sink.
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Available on Tape and Reel For Pick and Place Manufacturing.
.220
Model D10AAXXZ4
Material Declaration
D10AAXXZ4
Matte Tin Finish
Material (lbs) Alumina Diethylene Glycol Ethyl Ether Acetate Dipropylene Glycol Monomethyl Ether Epoxy resin and polymers Matte Tin Nickel Polymer Propylene Glycol Monomethyl Ethere Acetate Ruthenium Silicon Oxide Silver Alloy
Weight (g) 2.671E-02 1.004E-04 1.350E-04 6.000E-04 6.262E-04 3.817E-04 2.952E-04 8.050E-05 7.341E-04 3.397E-04 4.816E-03 (PPM) 7.496E+05 2.818E+03 3.789E+03 1.684E+4 1.758E+04 1.071E+04 8.285E+03 2.259E+03 2.060E+04 9.534E+03 1.352E+05 1086-56 12036-10-1 10097-28-6 7440-22-4 CAS Number 1344-28-1 1121-52 3459-09-48 1002 7440-31-5 7440-02-0
5.889E-05 2.212E-07 2.976E-7 1.323E-06 1.381E-06 8.416E-07 6.507E-07 1.775E-07 1.618E-06 7.490E-07 1.062E-05
Total Weight Calculated
7.855E-05
3.563E-02
Total Weight Measured
7.932E-05
3.598E-02
The values presented above are estimates at the current revision, and it is derived from vendor supplied data. While Anaren strives for accurate reporting, due to product and process variations at both Anaren and our suppliers, the quoted values are our best estimates only, and not measured absolute values. Product specifications are subject to change without notice.
Available on Tape and Reel For Pick and Place Manufacturing.
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392


▲Up To Search▲   

 
Price & Availability of D10AA30Z4

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X